WIRELESS AUDIO AND VIDEO UHF TRANSMITTER / RECEIVER WATCH CABLE TV ALL OVER THE HOUSE USE AS A WIRELESS CCD CAMERA SETUP. The UHF transmitter can transmit the audio/video signals from a VCR, TV set, LD, Satellite receiver.... to the distant receiver, which is connected to another TV or VCR. You can also use the transmitter and receiver to send the picture from a camcorder or CCD camera to a TV. Features a directional antenna for high-gain reception, superior signal/noise ratio for video and audio outputs, and four selectable channels for applications where multiple transmitters are used in the same area. Range up to 100 m (line of sight). SPECIFICATIONS Transmitting frequency: 2.4 GHz (4 selectable channels) @ 10mW Antenna: Directional flat plate Power requirements: 12 VDC @ 300 mA (2 x AC adaptors supplied) Operation frequency range: 2400~2483MHz Channel selection: PLL Synthesizer , 4ch. sliding switch Transmitter/Receiver: Supply current: 270mAtyp. Input/output sockets: RCAA/V line jacks Output Power (EIRP): 10dBm,max Input Sensitivity: (@videoS/Nratio>15dB) -75dBm,typ. Noise figure: 4dB,typ. Video: Input impedance: 75 ohm,typ. Input signal level: 1Vp-p,typ. Transmit S/N Ratio (100kHz,1Vp-p sinewave) 40dB,typ. Receive S/N Ratio: (100kHz,1Vp-p sinewave) 35dB,min. Carrier frequency accuracy: +/-30kHz RX output level: (100kHz,1Vp-psinewave) 0.8Vp-p,(0.3V Audio: Input impedance: 10K(,typ. Frequency Range: 50Hz~20kHz Input signal level: 3Vp-p,typ (modulation signal: 50Hz~15kHz sinewave) Harmonic distortion: 2%,max. (50Hz~6kHz, 3Vp-p sinewave) (6kHz~15kHz, 2Vp-p sinewave) S/N Ratio (50Hz~15kHz): 40dB min. Subcarrier Power Level: 18~22dBc (w.r.t.VideoCarrier) R-L separation: 30dB,min. (1kHz, 3Vp-p sinewave) Back to Satellite Sales.

[Home] [Satellite Services] [Aurora] [Antenna Services] [Links & News]
[Satellite Sales] [Satellite Classifieds] [Power Link] [Company Profile]